Where We Work
01Instrumentation schemes are derived per asset and per failure mode.
Instrumentation schemes are derived per asset and per failure mode. Nothing here is a standard package.
What We Do
The Full Scope, Specified
Instrumentation design, installation, GeoPro deployment, interpretation and long-term support. Every scope is defined with its deliverables and interfaces.
From asset to evidence
A monitoring scope with a clear engineering spine.
Explore how Geolook™ moves from the asset and monitoring objective to issued evidence and long-term ownership.
01 / 04
Service Lines
02Six scopes. One clear interface.
Each line can be taken standalone or as part of a turnkey scope. Where a line is taken standalone, the interfaces to adjacent work are defined in writing before award.
Instrumentation design and design basis
Specification, approvals and documentation
Supply, testing and factory acceptance
Installation and commissioning
What You Receive
03Every stage produces a document you can hold us to.
Monitoring scopes go wrong when the deliverable is a dashboard. This is the register of what is issued, when, and in what form.
Every row is an artefact, not an assurance.
Scope Boundary
04What we don't do.
Naming the edge of a scope is how interface disputes get avoided. We do not:
Defined interfaces
Documented baseline
Monitoring life support
Written scope boundary
Where We Work
Bridges·Tunnels·Metro and underground·Dams and reservoirs·Railway formations and slopes·RE and MSE walls·Buildings and heritage structures·Deep excavations
Instrumentation schemes are derived per asset and per failure mode. Nothing here is a standard package.
Service Lines
Six scopes. One clear interface.
Each line can be taken standalone or as part of a turnkey scope. Where a line is taken standalone, the interfaces to adjacent work are defined in writing before award.
01 / 06
SERVICE SCOPE
Instrumentation design and design basis
Instrument selection, quantities, locations, redundancy and alert thresholds derived from the structure's behaviour, construction sequence and governing failure modes. Design basis is documented and issued, not assumed.
Failure mode reviewSensor mappingThreshold derivationRedundancy planning
What You Receive
Every stage produces a document you can hold us to.
Monitoring scopes go wrong when the deliverable is a dashboard. This is the register of what is issued, when, and in what form.
Design basis
Instrumentation design basis report, sensor mapping and design basis register, threshold derivation
PDF, register
Approvals
Technical specification, methodology statement, datasheets, calibration certificates, vendor approval submission set
PDF, submission pack
Supply
Packing and dispatch list, calibration certificates, pre-dispatch verification records, warranty terms
PDF, certificates
Installation
Installation records, protection details, cable and enclosure schedules, photographic records
PDF, site records
Commissioning
Baseline report, as-built instrument register, commissioning and functional test certificate
PDF, register
Platform
GeoPro project configuration, threshold and alarm matrix, user access schedule, training handover
Platform, PDF
Operations
Periodic monitoring reports, exceedance and event reports, trend interpretation notes
PDF, GeoPro, API
Support
Calibration schedule and records, preventive maintenance log, system health and uptime record
PDF, GeoPro
Every row is an artefact, not an assurance.
How We Contract
Four ways to work with us.
01
Turnkey SHM
Full scope from design basis to AMC under one contract, one design intent, one point of accountability.
02
Supply and commission
Instrumentation, data acquisition and commissioning supplied against a defined specification, with baselining and handover.
03
GeoPro on your existing instrumentation
Platform deployment over instruments and loggers you already own. Third-party ingestion, threshold configuration, alarms and reporting, without replacing field hardware.
04
Monitoring operations and AMC
Interpretation, reporting, calibration and maintenance of a system installed by someone else, taken over under a defined condition survey.
Scope Boundary
What we don't do.
Naming the edge of a scope is how interface disputes get avoided. We do not:
- Carry out structural design, rehabilitation design or strengthening execution. We instrument and interpret, working alongside the designer of record.
- Issue structural safety certification or statutory clearances.
- Supply instrumentation we are not prepared to support through its monitoring life.
- Take over an existing system without a condition survey and a documented baseline.
Where the boundary falls on your project, we define it in writing before award.
Discuss Scope
Tell us the asset and the constraint.
Send the structure type, monitoring objective, construction stage and any specification already issued. We will respond with an indicative instrumentation scheme and scope.